add share buttons

Mazy Kazerooni

Be Social

By - Maria George

A Guideline To Your Log Home Restoration

A log house is always scenic with creative designs. A rustic setting has exceptional satisfaction to the owner. Most people associate log houses with the rural area, but this has changed over time. The hospitality industry has adopted log cabins at a higher rate. These stick-built houses require regular maintenance. Otherwise, it loses the picturesque view. This article gives a precise guideline to your log home restoration in Denver CO.

Do a thorough inspection regularly. You should walk around the house taking notes on any new development. The reason is that, as moisture leaves, it causes movement of woods which interferes with the diameter of the timber. The change will result in separation of the logs, which creates a space for water infiltration.

Look out for any possibility of mildew growing on the timber. The conditions for mildew growth are only slight moisture and room temperature. The presence of mold on the wood is an indication of moisture in the logs. A quick way to do away with the mildew is exposure to sunlight. You can look if there is a way of trimming the trees around to allow penetration of the sun.

Be keen to observe any insect activity. The presence of holes or sawdust is a clear indication that wood borers, carpenter ants or any other insect are slowly taking a heavy toll on the logs. It could be that your home never had a borate treatment before. You should treat the woods first before any other action. After drying, you can now soak the hole with an insecticide and caulk. In case the holes are big, you can use wood filler.

Check for caulk failure. You should inspect if the corners are well sealed. Separation of logs might occur due to a slight movement of the woods if caulk was overdone or underdone. You can consult a professional about the application of caulk. This is critical because once you use one product, there can never be changing, so you have to get it right from the beginning.

Splash some water on logs to test the finish. Usually, if the previous finish is still working, the water will roll. The finish is supposed to make the logs water-resistant. If the water splashed soaks in the logs, you should get prepared to apply a fresh finish. This, too, should be done following a piece of professional advice and recommendation.

Repair doors windows and remove rotten woods. Doors and windows are vulnerable to water penetration. To ascertain whether there is infiltration, watch out for a dark spot. The most recommended remedy is the use of expanding foam. Rotting logs should also be removed and replaced with the exact type.

The restoration process should be perfected to avoid further damages. A slight mistake in the process will cost you a lot to correct. If you have zero experience in handling this type of repairs, you should not hesitate to seek the services of a professional. Most of them are willing to help even with free advice.